Every business that employs even one worker must have a safety technician. For most employers the question is not whether they need one, but who will take on the role: an employee, an external associate, an external service or, under certain conditions, the employer themselves.
In short: a safety technician is an obligation for every business with staff. Employers can take on the role themselves only in Category B and C businesses, provided they meet the conditions and have completed the training. New training rules apply from 1/1/2027, while certificates issued up to 2010 remain valid until 31/12/2027.
If you want to take on the duties yourself, see IANAP’s Safety Technician programme for Categories B and C.
What a safety technician does
The safety technician is the employer’s main advisor on health and safety at work. They do not take responsibility away from the employer: responsibility for the safety of employees always remains with the employer. In practice, the safety technician:
- gives written recommendations, which are recorded in a special book,
- regularly inspects workplaces,
- investigates the causes of workplace accidents,
- supervises fire safety drills.
The special book of recommendations is now kept electronically, in the information system of the Labour Inspectorate, under ministerial decision 25548/2026. The written recommendations of the safety technician and the occupational physician are recorded there, the employer is notified electronically, and Labour Inspectorate officers have access for inspections. The safety technician performs their duties with professional independence and keeps confidential whatever they learn in the business. Disagreeing with the employer is not in itself grounds for dismissal, and any dismissal must be justified.
In addition, every business must have a written occupational risk assessment, whoever its safety technician is. The employer is responsible for drawing up the assessment, which can be carried out by the safety technician, the occupational physician or an internal or external protection and prevention service.
The role can be taken on by an employee of the business, an external associate, an External Protection and Prevention Service (EXYPP) or a combination of these. For the overall picture of the obligation, see the page safety technician, an obligation for every business.

Business categories
Businesses, operations and activities are classified into three risk categories, A, B and C, according to their sector of economic activity. The classification follows the table in article 29 of Law 5239/2025, which replaced article 500 of the Labour Law Code, based on the sector under the STAKOD 2008 classification of economic activities.
This table does not only set the category. The category also determines the minimum annual working time of the safety technician and the occupational physician, as well as the level of knowledge required of the safety technician. That is why a safety technician in a Category C business does not have the same requirements as one in a Category B business.
The category has practical consequences for the employer’s obligations: it determines whether the employer can take on the safety technician’s duties and what training is needed. In Category A the employer cannot take on the role, because this is allowed only in Categories B and C.
To find your category, start from the sector of the business’s main activity and look it up in the table of the law. If the business has several activities or you are unsure how it maps, ask the Labour Inspectorate for clarification before you appoint a safety technician. In applications for training programmes, the system checks the business’s activity codes (KAD) to classify it correctly, so make sure they are up to date. The correct category is the basis for every decision that follows.
When the employer takes on the role
Employers can perform the safety technician’s duties themselves only in Category B and C businesses. Even there, this is subject to conditions concerning the number of employees, the employer’s qualifications and their training. These cases are currently set out in article 502 of the Labour Law Code (Presidential Decree 62/2025), to which the new ministerial decision on training also refers.
The new ministerial decision on training shows where the limits lie in practice. It distinguishes Category C employers with up to 20 employees, who need the short programme, from those in Category B, who need the full one. Self-employed people without staff are not required to attend training, but they can attend if they say so when they apply.
If you assign the role to an employee of the business, they also need training. Its length depends on the category, the number of employees and whether they work full time, as shown in the next section.
Before you decide, think about the practical side too. The safety technician regularly inspects the premises and records recommendations, so an employer who takes on the role needs time and organisation. In larger or more complex businesses, an external associate or an EXYPP may be a more realistic solution.
Category B and C training
Training is the prerequisite for an employer or employee to perform the duties of safety technician. From 1/1/2027, ministerial decision 18503/2026 (Government Gazette B 3950/30.6.2026) applies, repealing the previous decision 2432/2024. Its key points:
- 35 hours over 7 days: for employers in Category B businesses and for full-time employees in Category B or C businesses with up to 20 people.
- 10 hours over 2 days: for employers in Category C businesses with up to 20 employees.
- Maximum cost: €140 for the 35-hour programme and €80 for the 10-hour programme, with no additional charges.
- Passing: full attendance with no absences and at least 80% in the final test, with up to 5 hours of training a day.
Training is delivered in person. Video conferencing is allowed only for trainees on remote islands with difficult access or for exceptional public health reasons. For programmes held during 2026, decision 2432/2024 still applies, together with circular 2141/27.01.2026. Since passing requires attendance without a single absence, schedule the seminar on days when you can be away from the business.
IANAP runs safety technician seminars for Categories B and C, lasting 10 to 35 hours, in person in Thessaloniki and Volos. For other programmes in the same field, see the health, safety and tourism seminars. If your business is in Category C and has up to 20 employees, the short programme applies to you; if it is in Category B, you need the 35-hour programme.

What applies to old certificates
Training certificates for employers in Category B and C businesses issued up to and including 31/12/2010 remain valid until 31 December 2027. This deadline is set by the new ministerial decision 18503/2026. If you have read about expiry at the end of 2026, go by the most recent rule. Check the issue date on your own certificate, because it determines which deadline applies to you.
What this means in practice:
- If your certificate was issued up to 2010, you can use it until 31/12/2027. To continue after that, you need new training before that date.
- This transitional rule applies only to certificates issued up to 2010. For newer certificates, check what the decision provides for your case.
- If you are planning new training during 2026, it will follow the rules of decision 2432/2024; the new rules apply from 2027.
For how the deadline had been shaped before the new decision, see also our article on safety technician retraining and employer training certificates.
Sources
- Ministry of Labour, Frequently asked questions on occupational health and safety. https://ypergasias.gov.gr/ergasiakes-scheseis/ygeia-kai-asfaleia-stin-ergasia/sychnes-erotiseis-kai-apantiseis-gia-tin-yae/
- Labour Inspectorate, Employment of a safety technician. https://www.hli.gov.gr/asfaleia-kai-ygeia/technikoi-asfaleias/apascholisi-technikou-asfaleias-2/
- Labour Inspectorate, Safety technician qualifications. https://www.hli.gov.gr/asfaleia-kai-ygeia/technikoi-asfaleias/prosonta-technikou-asfaleias/
- Labour Inspectorate, Responsibilities and duties of the safety technician. https://www.hli.gov.gr/asfaleia-kai-ygeia/technikoi-asfaleias/armodiotites-kathikonta-technikou-asfaleias/
- ELINYAE (Hellenic Institute for Occupational Health and Safety), Ministerial decision 18503/2026 (Government Gazette 3950/B/30.6.2026). https://www.elinyae.gr/ethniki-nomothesia/ya-185032026-fek-3950b-3062026
- Labour Inspectorate, Training programmes for employers and employees on safety technician duties, 2026. https://www.hli.gov.gr/dimosiefseis/programmata-epimorfosis-ergodoton-kai-ergazomenon-gia-themata-askisis-kathikonton-technikou-asfaleias-etous-2026-epikairopoiisi-06-10-2026/
- Law 5239/2025, article 29 (replacing article 500 of the Labour Law Code). https://www.taxheaven.gr/law/5239/2025/arthro/29
- Ministerial decision 25548/2026, Electronic keeping of the recommendations book of the Safety Technician and Occupational Physician. https://www.taxheaven.gr/circulars/55435/25548-25-09-2026
- Circular 2141/27.01.2026, Application of ministerial decision 2432/2024 for 2026. https://www.taxheaven.gr/circulars/51966/2141-27-01-2026
Contact IANAP
Frequently asked questions
Does a sole proprietorship need a safety technician?
Yes, if it employs even one employee. The obligation applies to all businesses with staff. A self-employed person without staff is not obliged to attend safety technician training.
Can the employer become the safety technician?
Only in Category B and C businesses, provided the employer meets the conditions on the number of employees and qualifications and has completed the training. From 1/1/2027 the training lasts 35 hours for Category B employers and 10 hours for Category C employers with up to 20 employees.
How do I find which category my business belongs to?
Category A, B or C follows from the business's sector of economic activity under STAKOD 2008, based on the table in Article 29 of Law 5239/2025. Look up the sector of your main activity in the table.
Is the safety technician seminar available online?
Under Ministerial Decision 18503/2026, in force from 1/1/2027, the training takes place in person. Videoconferencing is allowed only for remote islands or for exceptional public health reasons.
How much does the safety technician seminar cost?
Ministerial Decision 18503/2026 sets a maximum cost of €140 for the 35-hour programme and €80 for the 10-hour programme. The final cost is set by the training provider, within these limits.